In the steel industry, we commonly here Oxy-Fuel Cutting services or processes. This process can cut steel comprising composition is less than .3% carbon. Mild steel is composed of 98% iron, 1% manganese, carbon up to .3%, and various other elements in small amounts. But limitations are that oxy-fuel cutting cannot cut non-ferrous metals such as aluminum, stainless, brass, or copper.
In this blog, we will find out more about Oxy-Fuel Cutting process work:
The Oxy-fuel process is a rapid process that forms iron oxide from a chemical reaction between pure oxygen and steel. The surface of the edge of the steel is raised to approximately 1800°F through preheat flames. Pure oxygen is then synchronized toward the warmed area in the high-pressure stream. Once the steel oxidizes and framed into a cavity, the preheat and oxygen stream are moved at a consistent speed to shape a nonstop cut.
An Oxy-Fuel Cutting Company uses this technology and can considerably improve performance regarding cut-quality and cutting speed.
One can see such great results of around 0.5mm to 250mm, which makes this most widely applied industrial thermal cutting process. One can take these services from companies like Browning Enterprises Inc., Oxy-Fuel Cutting Company, Alabama.
This was just a reference, let us know some more basic details about Oxy-Fuel Cutting Services, Alabama
• To avoid melting of the material before the cut, the ignition temperature of the material must be lesser than its melting point
• The oxide melting point to be kept minimum as compared to the adjacent material to let it mechanically blown away by the oxygen jet
• To maintain the ignition temperature, the oxidation reaction between the oxygen jet and the metal must be adequate
• To avoid diluting the cutting oxygen a minimum of gaseous reaction products should be produced
We recommend connecting with a recognized steel company to get the Oxy-Fuel Cutting services and get the appropriate results.
0 Comments